
Services
Rock testing
Strength and index properties of rock cores and blocks for foundations on rock, tunnels, slopes and mining.
- 7 tests
- NABL TC-16395
- Lab & field team
- Jaipur, Rajasthan
Overview
Rock Testing at GDR Lab
When a foundation, a tunnel or a mine bench sits on rock, the design turns on a few measured properties. We prepare and test rock cores and block samples for strength and index properties, working from the cores our own drilling crew recovers or from samples you send.
Core preparation matters as much as the test: ends are cut and ground to the required flatness and the length-to-diameter ratio before loading, and the report states the sample dimensions and failure mode, not only a number.

What we test
- NX / BX rock cores from boreholes
- Block and irregular lump samples
- Quarry and aggregate source rock
- Tunnel and slope face samples
Who this is for
- Mining companies and quarry operators
- Tunnel, dam and bridge foundation designers
- Geotechnical consultants assessing rock sockets for piles
- Aggregate producers checking source rock quality
Test list
7 tests, with the method for each
Need a test that is not listed, or a whole specification mapped to methods? Send us the schedule and we will come back with a quote.
Strength
2 tests- 01Uniaxial compressive strength (UCS)IS 9143 / ASTM D7012
- 02Point load strength indexIS 8764
Index and physical properties
5 tests- 01Specific gravityIS 1122
- 02Bulk and dry densityIS 1122
- 03Water absorption and porosityIS 1124
- 04Natural water contentMethod on request
- 05Core preparation: cutting, grinding, L/D ratioMethod on request
Methods are shown as commonly specified. The exact method, and whether a test sits inside our NABL scope of accreditation, is confirmed with your quote.
Where these tests are used
- Rock-socketed pile and raft design
- Tunnel support and rock-mass classification inputs
- Slope and bench stability in mining
- Assessing a quarry as an aggregate source
Often combined with
Clients ordering rock testing usually also need
Soil Testing
Classification, compaction, strength and permeability tests for foundation and pavement design.
View testsSite & Field Testing
Geotechnical investigation, SPT, plate load, pile load and in-situ tests on your site.
View testsNDT & Bridge Load Testing
Non-destructive testing of concrete structures and full-scale bridge load tests.
View tests
What core size and length do you need for UCS?
Cores should be long enough to trim to the standard length-to-diameter ratio after the ends are ground, so send cores noticeably longer than the final specimen. Send the core box details and we will confirm what can be prepared from them.
Can you drill the cores as well?
Yes. Our field division does rock core drilling and sampling, so the same team recovers, logs and tests the core.
My sample is an irregular lump, not a core. Can it still be tested?
Irregular lumps can be tested for the point load index and for index properties. Uniaxial compressive strength needs a properly prepared core or cube specimen.
Need rock testing for your project?
Tell us the material and the tests; we reply within one working day.