Skip to content
Marshall stability test apparatus for bituminous mixes at GDR Lab

Services

Building materials & mix design

Concrete mix design plus cement, aggregate, concrete, steel and bitumen testing to IS codes, for site quality control and approvals.

  • 29 tests
  • NABL TC-16395
  • Lab & field team
  • Jaipur, Rajasthan

Overview

Building Materials & Mix Design at GDR Lab

This is the division site engineers call most. Cubes arrive every week, aggregate sources need clearing before a stockpile is bought, and a mix design has to be signed off before concreting starts. We run the IS-code test schedules that keep that work moving.

Mix designs are prepared to IS 10262 for structural concrete and for pavement quality concrete, using your own cement, aggregate and admixture samples, so the design matches the materials that will actually be used on the job.

Marshall stability test apparatus for bituminous mixes at GDR Lab

What we test

  • Concrete cubes, cylinders and cores
  • OPC, PPC and PSC cement
  • Coarse aggregate, fine aggregate, manufactured sand
  • Reinforcement steel and structural sections
  • Bitumen and bituminous mixes
  • Bricks, blocks and pavers

Who this is for

  • Contractors and site quality-control teams
  • Ready-mix plants and precast yards
  • Builders needing cube results for approvals
  • Highway projects with PQC and bitumen schedules

Test list

29 tests, with the method for each

Need a test that is not listed, or a whole specification mapped to methods? Send us the schedule and we will come back with a quote.

Concrete and mix design

6 tests
  1. 01Concrete mix design, structural gradesIS 10262
  2. 02Concrete mix design, pavement quality concrete (PQC)IS 10262
  3. 03Cube compressive strengthIS 516
  4. 04Cylinder and core compressive strengthIS 516
  5. 05Workability (slump)IS 1199
  6. 06Flexural strength of concreteIS 516

Cement

6 tests
  1. 01Consistency of standard pasteIS 4031 Part 4
  2. 02Initial and final setting timeIS 4031 Part 5
  3. 03Compressive strength of cement mortar cubesIS 4031 Part 6
  4. 04Soundness (Le Chatelier, autoclave)IS 4031 Part 3
  5. 05Fineness (blaine, sieve)IS 4031 Part 1 / Part 2
  6. 06Specific gravity and densityIS 4031 Part 11

Coarse and fine aggregate

9 tests
  1. 01Sieve analysis and gradingIS 2386 Part 1
  2. 02Flakiness and elongation indexIS 2386 Part 1
  3. 03Aggregate impact valueIS 2386 Part 4
  4. 04Aggregate crushing value and 10% fines valueIS 2386 Part 4
  5. 05Los Angeles abrasion valueIS 2386 Part 4
  6. 06Specific gravity and water absorptionIS 2386 Part 3
  7. 07Bulk density and voidsIS 2386 Part 3
  8. 08Soundness (sodium / magnesium sulphate)IS 2386 Part 5
  9. 09Silt and clay content, deleterious materialsIS 2386 Part 2

Steel and structural sections

3 tests
  1. 01Tensile strength, yield stress and elongationIS 1608 / IS 1786
  2. 02Bend and rebend testIS 1786
  3. 03Unit weight and dimensional toleranceIS 1786

Bitumen and bituminous mixes

5 tests
  1. 01Marshall stability and flowASTM D6927
  2. 02Penetration valueIS 1203
  3. 03Softening pointIS 1205
  4. 04DuctilityIS 1208
  5. 05Specific gravity of bitumenIS 1202

Methods are shown as commonly specified. The exact method, and whether a test sits inside our NABL scope of accreditation, is confirmed with your quote.

Where these tests are used

  • Mix design approval before concreting starts
  • Routine cube testing for site quality control
  • Clearing an aggregate or sand source before purchase
  • Reinforcement steel lot acceptance
  • Bituminous mix design and job-mix formula checks

Often combined with

Clients ordering building materials & mix design usually also need

  • NDT & Bridge Load Testing

    Non-destructive testing of concrete structures and full-scale bridge load tests.

    View tests
  • Soil Testing

    Classification, compaction, strength and permeability tests for foundation and pavement design.

    View tests
  • Site & Field Testing

    Geotechnical investigation, SPT, plate load, pile load and in-situ tests on your site.

    View tests

FAQ

Building Materials & Mix Design: common questions

Can't find your answer? Ask us directly.

How many cubes should I send, and when?

Follow the sampling frequency in your specification; the usual pattern is a set cast per batch and tested at 7 and 28 days. Mark every cube with the casting date, grade and location before it leaves site.

What do you need to prepare a concrete mix design?

The target grade and exposure condition, plus samples of the cement, coarse and fine aggregate and admixture you will actually use on the job. Working from the real materials is what makes the design usable on site.

Can you test cores cut from a finished structure?

Yes. We cut concrete cores on site and test them in the lab, usually alongside rebound hammer and ultrasonic pulse velocity readings on the same member.

Need building materials & mix design for your project?

Tell us the material and the tests; we reply within one working day.